HOW TO USE
Fill Solution Tank
CAUTION: Use only commercially available carpet and upholstery cleaners intended for machine applications.
Solution tank holds 1.5 gallons. Remove solution tank lid and fill with mixture of water and extraction detergent. (Follow recommended mix ratio on extraction detergent label.)
Note: Do not overfill.
Attach Vacuum Hose Coupling
•Push the hose coupling into the hose inlet.
•Give a slight twist to secure.
Attach Solution Hose Fitting
•Make sure the quick disconnects snap together firmly. As you do this, always inspect hoses for cracks, fraying or leaks. Do not use if hoses are damaged.
Carry
Handle
Hose Inlet
Connect Electric Plug
CAUTION: To reduce the risk of electric shock, do not lay cord on any
wet surfaces.
• Attach electric plug to extension cord provided.
• Plug extension cord into outlet.
Power Switch |
|
|
| |
The power switch is located on the side of the |
|
| Electric | |
|
| |||
cleaner next to the powercord. | Solution | Plug | ||
• | Wear ear protection (not provided) if | Hose |
| |
| operating the cleaner for a prolonged | Fitting |
| |
• | period of time. |
|
|
|
Push power switch to turn on. |
|
|
| |
Carry Handle |
|
|
| |
• | Carry handle is part of the tank. |
|
|
|
• | Always use this handle when lifting the |
|
|
|
| cleaner. |
|
|
|
Prime Pump |
|
|
| |
• Press trigger on solution wand until |
| Trigger |
| |
| there is a continuous flow of water. |
|
|
Your pump is now primed.
8