HOW TO USE (continued)
Begin Cleaning
With the cleaning nozzle you may begin cleaning. By pulling the trigger, you will dispense the solution onto the desired area. Use a backstroke motion. Because the vacuum is on, the fluid will quickly be sucked back into the wand. Make several dry passes over the affected area to completely remove any excess moisture. You will notice that the area you have just cleaned will be damp. This is normal.
Tips:
If used to clean up spills or messes, clean up as much of the spill or mess using paper towels before final cleaning with the cleaner. If used on fine fabrics or upholstery, test for color fastness in an inconspicuous place before cleaning.
Automatic Shut-Off
NOTE: Always use the wet vacuum cleaner in the upright position. If cleaner tips over, the suction automatically shuts off.
If the cleaner tips over:
•Turn off the power switch and set the cleaner upright.
•Wait a few seconds for the motor to come to a complete stop.
•Restart the motor.
When the tank is full:
•As the tank fills with liquid, the ball float (inside the cage) rises until it seats itself against the bottom of the motor.
•The motor sound becomes a high pitch sound.
•The
•Turn off the power switch.
•Empty the tank (instructions follow).
Empty Tank
CAUTION: Turn off the power switch and unplug electric cord to service.
•Lift the hose and drain any liquid back into the tank.
•Empty contents into a suitable drain by unscrewing the drain plug. (See page 7.)
•Use special care when emptying full tanks with liquids. Quick removal of the drain plug can result in a sudden rush of liquid.
•Replace drain plug to continue cleaning.
Clean and Store
Note: Turn off the power switch and unplug electrical cord before cleaning tank.
•Empty tank of all liquid and thoroughly rinse inside before storing.
•Clean and dry tank and all accessories.
•Store indoors in a cool, dry area.
9
