Troubleshooting, Symptom, Unit will not turn on

TROUBLESHOOTING

SYMPTOM:	Unit will not turn on.
Problem:	Not plugged in.
Solution:	Plug machine in proper outlet.
Problem:	Circuit breaker has popped.
Solution:	Reset circuit breaker. Make sure no other items are running on the
	same circuit as machine. Outlet must be a 20-amp circuit.
Problem:	Power cord has become disconnected from extension cord.
Solution:	Reattach power cord to extension cord.
SYMPTOM:	Pump is not running properly.
Problem:	Power cord and extension cord are not completely locked together.
Solution:	Snap firmly together.
Problem:	Jets on wand are clogged.
Solution:	Clean jet with soft wire brush or remove jet and flush clean.
Problem:	The solution tank is empty.
Solution:	Fill the solution tank up with a pre-mixed detergent.
Problem:	Pump is pulsating.
Solution:	Tighten all hoses. Check for leaks.
SYMPTOM:	Vacuum motor not working properly.
Problem:	Hose not connected tightly to wand or machine.
Solution:	Connect hose tightly.
Problem:	Hose is clogged with hair, carpet fibers and/or debris.
Solution:	Clean hose.
Problem:	Drain plug is not shut completely.
Solution:	Close drain plug completely.
Problem:	Vacuum tank lid is not on tightly.
Solution:	Secure the vacuum tank lid on tightly.
Problem:	Vacuum tank lid is cracked.
Solution:	Replace the vacuum tank lid.
Problem:	Vacuum hose is cracked or split.
Solution:	Replace vacuum hose.
Problem:	Water is coming out of the vacuum motor.
Solution:	Use a low foaming detergent.