9．ASHD (AUTO SHADING)
1)To start AUTO SHADING, transmit an ASHD START command under the following conditions: ●SHADING setting of OPTION should be SET.( OPTION SHADING MODE data should be 00H.) ●The camera screen (a live image) should be on. （OSD PAGE data should be 00H.）
●AWB，ABB，SHD should not be under execution. ( AUTO READ data should not be 01H，0BH，0FH.）
2)For the SHD status (whether in progress or complete) and the final result, read the contents of AUTO
READ by using the MEMORY DATA READ REQUEST（FF 03 FF FF）command. For the causes of errors, refer to the following:
SHD LIMIT
LEVEL HIGH
LEVEL LOW
SHD NG
NOT AVALABLE
10．Other
The product will store the data even if the data changes made in MEMORY DATA WRITE REQUEST（53 ADDRESS DATA(L) DATA(H)） is not enabled in the camera mode at the time of the change. The next time the product switches to the mode in which the data is enabled, the data will be reflected on the camera status.
Example: Setting MANUAL SHUTTER to 1/10000S, setting when the SHUTTER MODE is AUTO. => The product will only switch to 1/10000S when the SHUTTER MODE switches to MANUAL.