■ Passive mode
Most firewalls do not accept new connections initiated from external requests. If the FTP server supports passive mode, select this option to enable passive mode FTP and allow data transmission to pass through the firewall.
To verify if the FTP settings are correctly configured, click Test. The result will be shown in a
Click Save server to enable the settings, then click Close to exit the Add server page.
Server type - HTTP
Select to send the media files to an HTTP server when a trigger is activated.
■Server name: Enter a name for the server setting.
■URL: Enter the URL of the HTTP server.
■User name: Enter the user name if necessary.
■Password: Enter the password if necessary.
To verify if the HTTP settings are correctly configured, click Test. The result will be shown in a
Click Save server to enable the settings and click Close to exit the Add server page.
87