Flash ( ) / Left button
■ When the menu is displayed on the LCD monitor, pressing the LEFT button makes the cursor shift to the left tab.
■When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH ( ) button.
[ Selecting the Auto flash ]
●Selecting the flash mode
1.Rotate the MODE DIAL to select a RECORDING mode with the exception of Movie clip mode.
2.Press the Flash button until the desired flash mode indicator displays on the LCD monitor.
3.A flash mode indicator will be displayed on the LCD monitor. Use the correct flash to suit the environment.
● Flash range |
|
|
|
| (Unit : m) | ||
|
|
|
|
|
|
|
|
| ISO | Normal | Macro | Auto macro | |||
|
|
|
|
|
|
| |
|
| WIDE | TELE | WIDE | TELE | WIDE | TELE |
|
|
|
|
|
|
|
|
| AUTO | 0.8~3.0 | 0.8~2.5 | 0.3~0.8 | 0.4~0.8 | 0.3~3.0 | 0.4~2.5 |
|
|
|
|
|
|
|
|
INFORMATION
●Using the flash frequently will reduce the life of the battery.
●Under normal operating conditions the charging time for the flash is normally within 5 seconds. If the battery is weak, the charging time will be longer.
●During the continuous shot, AEB, some scene modes (p.26) and movie clip mode, the flash function will not operate.
●Take photographs within the flash range.
●The image quality is not guaranteed if the subject is too close or highly reflective.
●When taking an image in poorly lit conditions with the flash, there may be a white speck in the captured image. The speck is caused by the reflecting of the flash light from the atmospheric dust. It is not camera malfuction.
《25》