Connecting to a Power Source
■Insert the battery as shown
- If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ /
- When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover.
■There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery |
|
|
|
|
|
|
|
|
|
| |
indicator |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
| Low battery | Low battery | Low battery | ||||
Battery | The battery is | capacity (Prepare | capacity | capacity | |||||||
to recharge | (Prepare to | (Prepare to | |||||||||
status | fully charged | ||||||||||
or use spare | recharge or use | recharge or use | |||||||||
|
|
|
|
| |||||||
|
|
|
|
| battery) | spare battery) | spare battery) | ||||
|
|
|
|
|
|
|
|
|
|
|
Inserting the memory card
■Insert the memory card as shown.
- Turn off the camera’s power before inserting the memory card.
- Have the front of the memory card facing toward the front of the camera (lens) and the card pins toward the back of the camera (LCD monitor).
-Do not insert the memory card the wrong way round. Doing so may damage the memory card slot.
《10》