Samsung SCC-C4305(P) manual Color / BW, This is the IR Filter on mode with a normal color screen

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	ATW1
FOCUS MODE	AF
MOTION DET	ON...
COLOR/BW	COLOR
PRIVACY	...
SPECIAL	...
PRESET	...
EXIT	QUIT

Press the

ENTER button.

(MOTION DET)

AREAPRESET...

SENSITIVITY L---I---H RET

❙COLOR / BW

COLOR/BW turns IR(Infrared) Filter on or off. In the poor illumination environment, turns IR Filter off to raise the sensitivity to the same level as an black-and-white camera while in the good illumination environment, turns it on to convert to the COLOR mode in the normal screen condition to lower the sensitivity.

✔COLOR

This is the IR Filter ON mode with a normal color screen.

✔ BW... E

If you select ON and press the ENTER button, the MOTION DET screen will come up. You can set the AREA to which the Motion Detection function will be applied to either PRESET or USER. If you set the AREA option to PRESET, the Motion Detection function will be applied to the areas preset as factory defaults. If you set the AREA option to USER and press the ENTER button, you can change the area size and position and select the area where you want to apply the Motion Detection function. You can specify the size of the area by using the UP, DOWN, LEFT, and RIGHT buttons. If the area is not flashing, press the ENTER button. When the area starts flashing, use the UP, DOWN, LEFT

This is the IR Filter OFF mode, black-and-white (with the same sensitivity as a black-and-white camera). Select BW...

and press [Enter] and the BW submenu will appear. You may determine to sent out BURST signals by ON or OFF setting in this submenu.

❖WHITE BAL will be marked --- so that setup is unavailable.

and RIGHT buttons to specify the location of the area. Use the ENTER button and the UP, DOWN, LEFT, and RIGHT buttons to specify the size of the area and to position the area. Press the ENTER button again to exit the AREA setting menu. You can use the SENSITIVITY option to set the motion detection sensitivity. The higher the setting, the more sensitive the motion detection.

CAMERA ID	OFF
IRIS	ALC...
SHUTTER	OFF
AGC	LOW
WHITE BAL	---
FOCUS MODE	AF
MOTION DET	OFF
COLOR/BW	BW...
PRIVACY	OFF
SPECIAL	...
PRESET	...

Press the

ENTER button.

(BW)

BURST	ON
RET

(MOTION DET)

AREAUSER...

SENSITIVITY L---I---H RET

Press the

ENTER button.

SIZE

LOCATION

EXIT QUIT

23 24