✔ AUTO... |
Depending on illumination, it is automatically switched to |
the COLOR or BW mode. In the poor illumination |
environment, turns IR Filter off to convert to the |
White mode for better sensitivity and in the good |
illumination environment, turns it on to convert to the |
COLOR mode for worse sensitivity. Select AUTO and press |
[Enter] and the AUTO BW submenu will appear to control |
the BW level. Depending on ON or OFF, the BURST signal |
✔EXT...
This menu automatically converts the COLOR Mode into the BW Mode or vice versa depending on illumination with an external sensor. If you select the EXIT menu and press the [Enter] key, the EXTERNAL BW submenu will appear on the menu screen. You will be able to send out the BURST signal by turning on or off in this menu.
may output or no. It also sets up the duration for conversion |
and the brightness level for the conversion from the COLOR |
mode to the BW mode. Duration options are 10Sec., |
30Sec., 1Min., and 5Min.. In the BW mode, the WHITE BAL |
menu will be marked |
CAMERA ID | OFF | |
IRIS | ALC... | |
SHUTTER | OFF | |
AGC | LOW | |
WHITE BAL | ATW1 | |
FOCUS MODE | AF | |
MOTION DET | OFF | |
COLOR/BW |
| EXT... |
PRIVACY | OFF | |
SPECIAL | ... | |
Press the
ENTER button.
(EXT)
E
CAMERA ID | OFF |
IRIS | ALC... |
SHUTTER | OFF |
AGC | |
WHITE BAL | ATW1 |
(AUTO) |
PRESET | ... |
EXIT | QUIT |
BURST | ON |
RET |
|
FOCUS MODE | AF | |
MOTION DET | OFF | |
COLOR/BW |
| AUTO... |
PRIVACY | OFF | |
SPECIAL | ... | |
PRESET | ... | |
EXIT | QUIT | |
Press the
ENTER button.
BURST |
| ON |
LEVEL | MEDIUM | |
DURATION | S | |
RET |
| |
❙PRIVACY
This function designates an area that may violate PRIVACY and hides it when the camera shoots a screen including the area to protect Privacy. Up to 8 PRIVACY ZONEs are available for setup. After PRIVACY menu setup, press ENTER to enter the PRIVACY MAP screen. Now, press
- ALARM ON : It sends out signals through the ALARM output | |
| port in the BW mode. |
- | ALARM OFF : The ALARM output port is synchronized with the |
| MOTION DET finction regardiess of the COLOR/BW mode. |
- | BURST ON : The color burst signal is output together with |
UP/DOWN/LEFT/RIGHT key to choose one out of PRIVACY 0~7 and press ENTER to enter the PRIVACY setup menu.
black and white composite video signal. |
BURST OFF : The color burst signal is not output. |
- LEVEL : You can set the brightness level that changes from |
COLOR mode to BW mode in 3 steps : LOW, MEDIUM, and HIGH. |
- DWELL TIME : Set the HOLDING time for switching between |
COLOR and BW mode depending the changes in the |
amount of light. You can set the HOLDING time to 10sec |
(S), 30sec, 60sec, or 300sec( L). |
❖ In AUTO mode, AGC will operates in high speed mode, and |
you cannot change it manually, as it is indicated by |
CAMERA ID | OFF | |
IRIS | ALC… | |
SHUTTER | OFF | |
AGC | ||
WHITE BAL | ATW1 | |
FOCUS MODE | AF | |
MOTION DET | OFF | |
COLOR/BW | AUTO… | |
PRIVACY |
| OFF |
SPECIAL | … | |
PRESET | … | |
EXIT | QUIT | |
Press the
ENTER button.
(PRIVACY MAP)
0 | 1 | 2 | 3 |
4 | 5 | 6 | 7 |
RET
25 | 26 |