Shooting ( 
)
ACB
Drive mode
This function is to adjust the contrast 
automatically when taking photos in an 
environment with big exposure difference i.e. 
backlight or contrast. This function adjusts 
the brightness automatically and allows the 
subject to be photographed clearly. 
ACB
BackMove
You can select single, continuous, motion capture, and AEB (Auto Exposure Bracketing).
[Single] ( | ) | : Take one picture only. |
|
[Continuous] ( | ) : Images will be |
| |
|
| taken continuously |
|
|
| until the shutter |
|
|
| button is released. | Drive |
[Motion Capture] ( | ) : This takes 6 shots |
| |
- [ACB] Sub menus: [Off], [On].
ÄWhen using the [Program] mode, the ACB function will operate.
|
| per second, when | Back | Move |
|
|
|
| |
|
| the shutter is pressed and held down. After | ||
|
| completing the continuous shooting, images | ||
|
| are saved and the images play back on the | ||
|
| Rear LCD. The maximum number of shots is | ||
|
| 30 and the image size is fixed as VGA. | ||
[AEB] ( | ) | : Take three pictures in a series in different | ||
|
| exposures: standard exposure (0.0EV), | ||
|
| short exposure | ||
|
| (+1/2EV). |
|
|
High resolution and picture quality increases file saving time, which increases
If the [Continuous], [Motion Capture], [AEB] sub menu is selected, the flash will be off automatically.
If less than 3 pictures are available on the memory, the AEB shooting is not available.
It is best to use a tripod for the AEB shooting as the time to save each image file is longer and blurring caused by camera shake may occur.
51