PictBridge : Reset
Important notes
Initializes
1.Use the Up / Down button to select the [Reset] menu tab. And then press the Right button.
2.Use the Up / Down button to select the desired sub menu, and then press the OK button.
Date | :Auto | |
File Name | :Auto | |
|
| |
Reset | NoNo |
|
| Yes |
|
|
|
|
Back | Set | |
Be sure to observe the following precautions!
This unit contains precision electronic components. Do not use or store this unit in the following locations.
- Areas exposed to severe changes in temperature and humidity. |
- Areas exposed to dust and dirt. |
- Areas exposed to direct sunlight or the inside of a vehicle in hot |
weather. |
- Environments where there is high magnetism or excessive vibration. |
If [Yes] is selected : All print and image settings will be reset.
If [No] is selected : Settings will not be reset.
ÄDefault print setting varies depending on the printer manufacturer. For your printer’s default setting, refer to the user’s guide that came with your printer.
- Areas with high explosives or highly flammable materials. |
Do not leave this camera in places subject to dust, chemicals (like naphthalene and mothballs), high temperature and high humidity. Keep this camera with silica gel in a hermetically sealed box when not planning to use the camera for a long period of time
Sand can be particularly troublesome to cameras.
-Do not let sand get inside the camera when using it on beaches, coastal dunes, or other areas where there is lots of sand.
-Doing so may result in failure or may permanently render the camera unusable.
Handling the camera
-Never drop the camera or subject it to severe shocks or vibrations.
-Protect the large size LCD monitor from an impact. When this camera is not used, keep it in the camera case.
-Avoid obstructing the lens or the flash when you capture an image.
-This camera is not waterproof.
To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.
91