Before contacting a service center
Please check the following
The camera doesn’t switch on There is low battery capacity
Insert a charged battery or recharge the battery (p.15) Battery is inserted incorrectly with the polarities reversed Insert the battery according to the polarity marks (+,
The camera power ceases while in use
The battery is exhausted
Insert a charged battery or recharge the battery (p.15) The Camera is turned off automatically
Turn on the camera power again
Operation has ceased in a low temperature outside of the camera usage temperature range
Make the camera and battery warm by placing them in your pocket, etc. and then immediately before shooting, place the battery in the camera and then shoot
Camera does not take images when pressing the Shutter button There is insufficient memory capacity
Delete unnecessary image files The memory card has not been formatted
Format the memory card (p.61) The memory card is exhausted
Insert a new memory card The camera's power is off
Turn the camera power on The battery is exhausted
Insert a charged battery or recharge the battery (p.15) Battery is inserted incorrectly with the polarities reversed Insert the battery according to the polarity marks (+,
The camera suddenly stops working while in use
The camera stopped due to a malfunction
The images are unclear
A picture was taken of the subject without setting an appropriate macro mode
Select an appropriate macro mode to take a clear image Taking a picture beyond the flash range
Take a picture within the flash range The lens is smudged or dirty
Clean the lens
94