Samsung L200 manual Cable, Connect the supplied USB cable Case, Manager, Again, Beside them

Page 98

FAQ

Please check the following if the USB connection malfunctions.

Case 1	USB cable is not connected or it is not the supplied USB
	cable.

oConnect the supplied USB cable.

Case 2	The camera is not recognised by your PC. Sometimes, the
	camera may appear under [Unknown Devices] in Device
	Manager.

oInstall the camera driver correctly.

Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera.

Case 3	There is an unexpected error during ﬁle transfer.
	oTurn the camera power off and on again. Transfer the ﬁle
	again.

Case 4

When using the USB hub.

oThere may be a problem in connecting the camera to the PC through the USB hub if the PC and the hub are not compatible. Wherever possible, connect the camera to the PC directly.

Case 5

Are other USB cables connected to the PC?

oThe camera may malfunction when it is connected to the PC at the same time as another USB cable. In this case, disconnect the other USB cable, and connect only one USB cable to the camera.

Case 6	When I open the Device Manager (by clicking Start
	(Settings) Control Panel (Performance and Maintenance)
	System (Hardware) Device Manager), there are Unknown
	Devices or Other Devices entries with a yellow question
	mark(?) beside them or devices with an exclamation mark(!)
	beside them.

oRight-click on the entry with the question (?) or exclamation

(!) mark and select “Remove”. Restart the PC and connect the camera again. For Windows 98SE PC, remove the camera driver also, restart the PC, and then reinstall the camera driver.

Case 7	In some security programs (Norton Anti Virus, V3, etc.), the
	computer may not recognise the camera as a removable disk.
	oStop the security programs and connect the camera to the
	computer. Refer to the security program instructions about
	how to temporarily disable the program.
Case 8	The camera is connected to the USB port located on the
	front of the computer.
	o When the camera is connected to the USB port located on
	the front of the computer, the computer may not recognise
	the camera. Connect the camera to the USB port located on
	the back of the computer.

97

Image 98

Contents Page Instructions Getting to Know your cameraPage Content Content ACB Brightness control Contrast controlContent Optional Items System chartIncluded items Front & Top Identiﬁcation of featuresMode dial Shutter button Microphone Back Bottom Battery holder Battery chamberBattery chamber cover Tripod socket Memory card slot Flash Function buttonCamera Status Lamp Self-timer lampMode icon Connecting to a Power Source Still image MovieConnecting to a Power Source Charging LED „ How to charge the rechargeable battery SLB-10A„ Charging LED of the AC Adapter Battery Inserting the battery Inserting the memory cardWhen the battery chamber cover You have inserted battery, pleaseInstructions on how to use the memory card About 30FPS 20FPS 15FPSSetting up the Language When Using the Camera for the First TimeSetting up the date, time and date type LCD monitor indicator in recording mode Description IconsHow to use the Program mode Starting the recording modeHow to use the Auto mode If the image size is  or , the DIS mode cant be selected How to use the Manual modeHow to use the DIS mode Pressing Left/Right button Using the Photo Help Guide modeFunction that can be used when focusing is difﬁcult Pressing the Left Right buttonMode Icon Description How to use the Portrait modeHow to use the Scene modes Recording the movie without sound How to use the Movie modePausing while recording a movie Successive Recording Image size and type are listed belowThings to Watch Out for When Taking Pictures Pressing the shutter button down half wayShutter button Setting up the recording function using the camera buttonsPower button Zoom W / T buttonTele zoom „ Function description Function Description / Info  / Up buttonMacro  / Down button Normal „ Types of focus mode and focus range W Wide, T TeleAuto  Program  SelectableNormal Macro Auto macro Focus lockFlash  / Left button Icon Flash mode Description Self-timer  / Right button „ Available ﬂash mode, by recording mode SelectableIcon Mode Motion Icon & Self-timer lamp„ OK button Menu / OK buttonFD Face Detection  button Pressing the Menu buttonFocus on the nearest person Digital zoom is not activated in this modeThis function can detect up to 9 people „ Self Portrait Portrait, Beach & SnowEffect button Colour Image Adjust Effect button Colour Image Effect button SharpnessEffect button Contrast „ You can change the contrast of the imageEffect button Saturation Fn buttonSize How to use the Fn menuPress the Fn button in an available mode Metering Mode Still Image modeQuality / Frame rate AEB  Take three pictures Drive modeReleased Shutter button White balanceIcon Description Exposure compensation menu bar will appear as shown Exposure compensationMovie frame stabiliser RecordingAvailable mode Setting up the recording function using the LCD monitorHow to use the menu Voice Mute OffACB Off Focus AreaCenter AF Voice Memo Voice Recording Press the shutter button and take a pictureScene Mode Menu Scene modePausing while recording a voice Recording the movie without voicePlaying back a still image Starting play modePlaying back a movie Name Movie capture function On camera movie trimmingYou can capture still images from the movie Yes The extracted frames are saved as a new ﬁle namePlay back the voice memo Playing back a recorded voice Playing back a voice memoMemo  againButton  LCD monitor Indicator in play back modeThumbnail  / Enlargement  button Pressing the enlargement Button  Highlighted imageSetting up the play back function using the camera buttons Image sizeInfo  / Up button Play & Pause  / Down buttonPrinter  button Left / Right / Menu / OK buttonDelete  button Effect button Resize UP / Down button Effect button Rotating an imageRotate  menu tab Red eye Removal Brightness control Effect button Image editingMenu Tab Main Menu Setting up the play back function using the camera buttonsSaturation control Sub Menu Setting up the play back function using the LCD monitorMenu Tab Menu Tab Main Menu Sub MenuStart the multi slide show Multi slide show Selecting Images Are played backAt set intervals Conﬁgure multi slide show effects Setting play intervalSetting Background Music Images are displayed with a special effectProtecting images Playback Voice memo Select Selection window for an image to Deleting imagesBe deleted is displayed Image to print Print is displayedUp / Down / Left / Right Select an Zoom W / T Button Select the number of printsPrinted size of the image is displayed Copy To Card„ Print size Select Selection window to changeMovies and voice ﬁles cannot be printed „ Connecting the Camera to a PrinterPictBridge Names start from after the last stored ﬁle nameYou can select images you want to print PictBridge Picture Selection„ Easy printing Press the Up / Down button to select the number of printsMenu Function Sub menu PictBridge Print SettingPictBridge Reset Sound  VolumeSound menu Start up soundAF Sound Setup menuBeep Sound Self PortraitSetting up the Date / Time / Date type Language sub menuStart up image LCD brightnessLCD save Quick viewFormatting a memory Initialisation File nameAuto power off Imprinting the recording dateSelecting Video out type Movie output signal from the camera can be Ntsc or PAL„ Connecting to an external monitor A, Canada, Japan, South Korea, Taiwan, MexicoYou can turn on and off the Auto Focus lamp Software NotesAuto Focus lamp For Windows For Macintosh System RequirementsAbout the software Setting up the application software „ You can visit the Samsung web-site through the internetSetting up the application software Camera Computer are connected Starting PC mode„ Connecting the camera to a PC External device selection menu will beAn image ﬁle is transferred from the camera to your PC „ Downloading stored imagesConnect the camera to your PC with the USB cable Removing the removable disk Double-clickSetting up the USB Driver for MAC Using the USB Driver for MACSamsung Master Removing the USB Driver for Windows 98SESamsung Master Saturation Adjust You can modify image quality. See the Help menuEdit Clip Windows media asf ﬁle typesSpeciﬁcations Color Effect FlashSharpness White BalanceOperating Temperature Dimensions WxHxDWeight ButtonImportant notes Areas with high explosives or highly ﬂammable materialsExtremes in temperature may cause problems Do not attempt to disassemble or modify the cameraLow Battery Card ErrorFile Error Card LockedBefore contacting a service centre Camera buttons do not operate ﬂash does not ﬁreIncorrect date and time is displayed Images don’t play backCable Install the camera driver correctlyHow to temporarily disable the program Connect the supplied USB cable CaseInsert the CD provided with the camera When the movie doesn’t play back on the PCCorrect Disposal of This Product Model No FCC notice„ Note Address100

Related manuals

Manual 114 pages 36.68 Kb