Samsung L200 manual Correct Disposal of This Product, When the movie doesn’t play back on the PC

Page 99

FAQ

When the movie doesn’t play back on the PC

KWhen the movie recorded by the camera doesn’t play back on the PC, the causes are mostly due to the codec installed on the PC.

„When the DirectX 9.0 or later is not installed o Install the DirectX 9.0 or later

1)Insert the CD provided with the camera

2)Run the windows explorer and select the [CD-ROM drive:\ USB Driver\ DirectX 9.0] folder and click the DXSETUP.exe file.

The DirectX will be installed. Visit the following site for downloading the DirectX.http://www.microsoft.com/directx

„If a PC (Windows 98SE) stops responding while the camera and PC are connected repeatedly

o If a PC (Windows 98SE) is turned on for a long time and the camera is connected repeatedly, the PC may not recognise the camera.

In this case, re-start the PC.

„If a PC connected with the camera stops responding while Windows is starting.

o In this case, disconnect the PC and the camera and Windows will start. If the problem happens continuously, set the Legacy USB Support to disable and re-start the PC. The Legacy USB Support is in the BIOS setup menu. (The BIOS setup menu differs from the PC manufacturers and some BIOS menus don’t have Legacy USB Support) If you can’t change the menu by yourself, contact to the PC manufacturer or BIOS manufacturer.

„If the movie can’t be deleted, or the removable disk can’t be extracted or an error message displays during the file transfer.

o If you install only the Samsung Master, the problems mentioned above occasionally happen.

-Close the Samsung Master program by clicking the Samsung Master icon on the Taskbar.

-Install all the application programs included in the software CD.

Correct Disposal of This Product

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable re-use of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract.

This product should not be mixed with other commercial waste for disposal.

Samsung Techwin cares for the environment at all product manufacturing stages to preserve the environment, and is taking a number of steps to provide customers with more environment-friendly products. The Eco mark represents Samsung Techwin’s will to create environment-friendly products, and indicates that the product satisfies the EU RoHS Directive.

98

Image 99
Contents Page Getting to Know your camera InstructionsPage Content Content Brightness control Contrast control ACBContent System chart Included itemsOptional Items Identification of features Mode dial Shutter button MicrophoneFront & Top Back Function button Battery holder Battery chamberBattery chamber cover Tripod socket Memory card slot Flash BottomSelf-timer lamp Mode iconCamera Status Lamp Still image Movie Connecting to a Power SourceConnecting to a Power Source „ How to charge the rechargeable battery SLB-10A „ Charging LED of the AC AdapterCharging LED You have inserted battery, please Inserting the battery Inserting the memory cardWhen the battery chamber cover BatteryInstructions on how to use the memory card 30FPS 20FPS 15FPS AboutWhen Using the Camera for the First Time Setting up the date, time and date typeSetting up the Language Description Icons LCD monitor indicator in recording modeStarting the recording mode How to use the Auto modeHow to use the Program mode How to use the Manual mode How to use the DIS modeIf the image size is  or , the DIS mode cant be selected Pressing the Left Right button Using the Photo Help Guide modeFunction that can be used when focusing is difficult Pressing Left/Right buttonHow to use the Portrait mode How to use the Scene modesMode Icon Description Image size and type are listed below How to use the Movie modePausing while recording a movie Successive Recording Recording the movie without soundPressing the shutter button down half way Things to Watch Out for When Taking PicturesZoom W / T button Setting up the recording function using the camera buttonsPower button Shutter buttonTele zoom Function Description / Info  / Up button Macro  / Down button„ Function description Selectable „ Types of focus mode and focus range W Wide, T TeleAuto  Program  NormalFocus lock Flash  / Left buttonNormal Macro Auto macro Icon Flash mode Description „ Available flash mode, by recording mode Selectable Self-timer  / Right buttonMotion Icon & Self-timer lamp Icon ModePressing the Menu button Menu / OK buttonFD Face Detection  button „ OK buttonPortrait, Beach & Snow Digital zoom is not activated in this modeThis function can detect up to 9 people „ Self Portrait Focus on the nearest personColour  Image Adjust Effect button Effect button Colour„ You can change the contrast of the image Effect button SharpnessEffect button Contrast ImageFn button Effect button SaturationHow to use the Fn menu Press the Fn button in an available modeSize Mode Still Image mode Quality / Frame rateMetering  Drive modeReleased AEB  Take three picturesWhite balance Icon DescriptionShutter button Recording Exposure compensationMovie frame stabiliser Exposure compensation menu bar will appear as shownVoice Mute Off Setting up the recording function using the LCD monitorHow to use the menu Available modeFocus Area Center AFACB Off Press the shutter button and take a picture Voice Memo Voice RecordingRecording the movie without voice Scene modePausing while recording a voice Scene Mode MenuStarting play mode Playing back a moviePlaying back a still image Yes The extracted frames are saved as a new file name Movie capture function On camera movie trimmingYou can capture still images from the movie Name again Playing back a recorded voice Playing back a voice memoMemo Play back the voice memoPressing the enlargement Button  Highlighted image LCD monitor Indicator in play back modeThumbnail  / Enlargement  button Button Image size Setting up the play back function using the camera buttonsPlay & Pause  / Down button Info  / Up buttonLeft / Right / Menu / OK button Delete  buttonPrinter  button Effect button Resize Effect button Rotating an image Rotate  menu tabUP / Down button Brightness control Effect button Image editing Red eye RemovalSetting up the play back function using the camera buttons Saturation controlMenu Tab Main Menu Menu Tab Main Menu Sub Menu Setting up the play back function using the LCD monitorMenu Tab Sub MenuAre played back Multi slide show Selecting Images Start the multi slide showImages are displayed with a special effect Configure multi slide show effects Setting play intervalSetting Background Music At set intervalsPlayback  Voice memoProtecting images Deleting images Be deleted is displayedSelect Selection window for an image to Zoom W / T Button Select the number of prints Print is displayedUp / Down / Left / Right Select an Image to printSelect Selection window to change Copy To Card„ Print size Printed size of the image is displayedNames start from after the last stored file name „ Connecting the Camera to a PrinterPictBridge Movies and voice files cannot be printedPress the Up / Down button to select the number of prints PictBridge Picture Selection„ Easy printing You can select images you want to printPictBridge Print Setting PictBridge ResetMenu Function Sub menu Start up sound VolumeSound menu Sound Self Portrait Setup menuBeep Sound AF SoundLanguage sub menu Setting up the Date / Time / Date typeLCD brightness Start up imageQuick view Formatting a memoryLCD save File name InitialisationImprinting the recording date Auto power offA, Canada, Japan, South Korea, Taiwan, Mexico Movie output signal from the camera can be Ntsc or PAL„ Connecting to an external monitor Selecting Video out typeSoftware Notes Auto Focus lampYou can turn on and off the Auto Focus lamp System Requirements About the softwareFor Windows For Macintosh „ You can visit the Samsung web-site through the internet Setting up the application softwareSetting up the application software Camera External device selection menu will be Starting PC mode„ Connecting the camera to a PC Computer are connected„ Downloading stored images Connect the camera to your PC with the USB cableAn image file is transferred from the camera to your PC Double-click Removing the removable diskUsing the USB Driver for MAC Setting up the USB Driver for MACRemoving the USB Driver for Windows 98SE Samsung MasterSamsung Master Windows media asf file types Adjust You can modify image quality. See the Help menuEdit Clip SaturationSpecifications White Balance FlashSharpness Color EffectButton Dimensions WxHxDWeight Operating TemperatureAreas with high explosives or highly flammable materials Important notesDo not attempt to disassemble or modify the camera Extremes in temperature may cause problemsCard Locked Card ErrorFile Error Low Battery Before contacting a service centre Images don’t play back flash does not fireIncorrect date and time is displayed Camera buttons do not operateConnect the supplied USB cable Case Install the camera driver correctlyHow to temporarily disable the program CableWhen the movie doesn’t play back on the PC Correct Disposal of This ProductInsert the CD provided with the camera Address FCC notice„ Note Model No100
Related manuals
Manual 114 pages 36.68 Kb