Samsung HZ50W manual Zoom W/T Lever, Appears on the thumbnail. You can

File Options ( )

DPOF

DPOF(Digital Print Order Format) allows you to embed printing information in your memory card’s MISC folder. Select the pictures

Standard

This function allows you to embed printing quantity information in a stored image.

to be printed and how many prints to make.

The DPOF indicator will displays on the LCD screen when an image that has DPOF information plays back. Images can then be printed on DPOF printers, or at an increasing number of photo labs.

This function is not available for Movie clips and Voice recording files.

When the wide angle image is printed as a wide angle print, 8% of the left and right side of the image may not be printed. Check that your printer can support the wide angle image when you print the image. When you get the image printed at a photo lab, request that the image be printed as a wide angle image. (Some photo labs may not support the wide angle size print.)

1.Press the Up / Down button, select the [DPOF] menu tab, and then press the Right button.

2.Press the Right button again and the [Standard] sub-menu appears.

3.Select a desired sub-menu by pressing the Up / Down button, and then pressing the OK button.

[Select] : The selection window appears. You can select photos to print.

-Up / Down / Left / Right : Select an image to print.

Delete

Protect

Select Image
Face List Edit
Voice memo Select	:Off
All

DPOF Reset

Copy to Card

	Back		Set
	00	00	01
	00	02
11	12	1	3	5
	Quantity		Set

Depending on the printer, the image saved in portrait orientation may not be printed in portrait orientation.

- Zoom W/T Lever :
Select the number of prints. The number
appears on the thumbnail. You can
		0
select the number of prints for multiple
photos. Press the Fn button to confirm.
[All] : Configure number of prints for all
pictures except movie and voice	Quantity		Set
files. The number appears on the LCD screen. Use the
Up/Down button to select a number. Press the OK button
to confirm.

- Up / Down button : Select a number of prints.

[Reset] : Cancel the print setup.

4.Press the OK button to confirm the setting. If an image carries DPOF instruction, the DPOF indicator () appears on the image.

094