Samsung SID-450 instruction manual Ssnr Samsung Super Noise reduction, SENS-UP Low illuminance

Page 16

Camera Operation

SSNR (Samsung Super Noise reduction)

The background noise in the low light level decreases automatically as the level of gain changes.

1.Please position the arrow to point to 'SSNR' on the SETUP menu by using the UP and DOWN buttons.

2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button.

OFF: There is no reduction in noise level.

LOW: There is a small reduction in noise level with almost no ghost image.

MIDDLE: The most effective mode. There is a sufficient reduction in noise levels without causing much ghost imaging.

HIGH: The level of noise is reduced greatly, however there is an increase in ghost imaging.

Notes

• When AGC is turned off, SSNR does not operate.

SENS-UP (Low illuminance)

SENS-UP helps maintain a bright, clear screen image by automatically detecting changes in the level of light in low light level conditions.

1.Please position the arrow to point to 'SENS-UP' on the SETUP menu by using the UP and DOWN buttons.

2.Please select the mode you wish to operate by pressing the LEFT or RIGHT button.

AUTO: Low light level auto mode

OFF: The function does not operate.

Notes

• When SHUTTER is in the manual mode, SENS UP does not operate.

3. Please press the SETUP button when all the settings are complete.

Notes

•The maximum storage magnification in low light level can be adjusted by pressing the SETUP button in 'AUTO' mode.(X2~X128)

•As the magnification increases, the screen gets brighter; moving object gets more afterimage.

•If storage magnification is increased while SENS UP is operating, it may cause noise, and spots may appear; however this is normal.

COLOR DOME CAMERA 30 User’s Manual

COLOR DOME CAMERA 31 User’s Manual

Image 16
Contents SID-450 Correct Disposal of This Product Contents Features Built-in Auto Iris Vari-Focal LensPrecautions Lens Rotation3-axis Lens Rotation3-axis Guide CompositionRotation3-axis Lock Focus Handle Installation Camera InstallationWhen installing the camera on a electrical box When installing on a adapter plateElectrical box 85 X 85 and 83.5X Adjusting lens angle Lens 3-axis adjustmentAdjusting the screen, unlock or lock it Unlocking direction Locking directionAdjusting varifocal lens zoom and focus Connecting to a MonitorMenu Setup menu Connecting to PowerCamera Operation Settings LENSAdjusting to the brightness levelShutter condition and speed control White Balance controlBacklight Backlight Compensation AGC Auto Gain ControlSsnr Samsung Super Noise reduction SENS-UP Low illuminancePlease press the Setup button SpecialOn The color mode is selected electronically You can adjust the desired phase from 0 toCorner Color Electronic DAY & NightExit Troubleshooting Specifications DimensionDeclaration of Conformity