Name and Function of Each Section
Zoom Handle
To adjust zoom magnification by turning.
SETUP button
Used for the menu display or function settings.
Left button | Right button |
Used when changing item values, by moving the cursor to the left or right on the menu screen
Up button | Down button |
Used when changing item values, by moving the cursor to the up or down on the menu screen
Service connector for the easily install the camera
A terminal can be connected to an LCD monitor, allowing the operator to easily adjust
the camera angle within the monitoring range during its installation.
Service/ Monitor Cable |
External Viewer (not supplied)
Power input jack
BNC jack
Dome cover
Dome cover is made of high sensitivity poly carbonates
COLOR DOME CAMERA 12 User’s Manual
Installation
Camera Installation
Notes
•The product has been designed for installation on a ceiling. If the ceiling is not strong enough to support the camera, it may fall. Take the necessary steps to strengthen the installation surface before installing the camera.
Remove the dome cover by turning it
* To install the dome cover on the camera body, turn the latches in locking direction as shown in the figure 1.
Latch
Camera body
Latch
Locking direction
Unlocking direction | Locking direction |
(Counterclockwise) | (Clockwise) |
Dome cover |
|
COLOR DOME CAMERA 13 User’s Manual