Sealife DIGITAL FLASH manual Setting the preflash cancellation switch

Page 14

Setting the preflash cancellation switch.

For all SeaLife digital and film camera’s, set switch to “0” position. For all non-SeaLife digital cameras, set switch to the # 4 position to start.

• Turn Digital Flash power ON. Wait for the “ready light” to illuminate.

• Turn on your digital camera and take a test picture of the Digital Flash. Aim camera at the Digital Flash light sensor.

• Review image on the camera and see if the Digital Flash firing is visible in the picture.

If you see the Digital Flash firing in the picture, keep the switch set a #4 (this indicates that your camera uses 4 pre-flashes).

12

Image 14

Contents Digital Flash Page Contents SeaLife Digital Flash Features and Benefits Without Digital Flash With Digital Flash Page III. Picture samples you can do this Page IV. Preparing your camera and SeaLife Digital Flash For non-SeaLife camera’sPage Prepare your Digital Flash Sealing Latch Magnetic switchDischarge flash Page Setting the preflash cancellation switch Page Pre-flash cancellation settings Switch position Description of settingPage Page Page Page Test Flash Test Pictures Digital Flash-Ready LightPage Page Page Camera with two Digital Flashes How to use the Digital Flash underwater Overexposed pictureAdjusting camera settings Depth Visibility LightDepth Visibility Light Page Using the Digital Flash variable power adjustment Page VI. Tips from the Pro’s Stephen FrinkSTEPHEN’S TIP 1 Minimize Backscatter STEPHEN’S TIP 2 Shrink the Water Column STEPHEN’S TIP 3 Choose the Right Subject STEPHEN’S POINT-AND-SHOOT Workshop Cathy Church CATHY’S TIPCATHY’S TIP Page Page John Chandler JOHN’S TIPJOHN’S TIP VII. Care and Maintenance Page VIII. Glossary Page IX. Trouble Shooting Guide Flash does not fire all the time Dark areas in your pictures Page Page Page Page Item SL972 New! SeaLife Lens Dock Page Page Page XI. Warranty statement and service Español Deutsch Français Italiano