Sealife DIGITAL FLASH manual

Page 10

•Important: Turn off camera’s red-eye reduction.

•Select your desired image resolution.

•Use camera’s manual exposure mode to control aperture and shutter speed, if possible.

•Read your digital camera instruction manual for how to adjust the above mentioned cameras settings.

•Inspect and clean camera housing and main O-ring (Make sure O-ring is not damaged and perfectly clean).

•Insert camera into housing and seal.

•Test fire the camera to make sure camera’s flash fires.

8

Image 10

Contents Digital Flash Page Contents SeaLife Digital Flash Features and Benefits Without Digital Flash With Digital Flash Page III. Picture samples you can do this Page IV. Preparing your camera and SeaLife Digital Flash For non-SeaLife camera’sPage Prepare your Digital Flash Discharge flash Magnetic switchSealing Latch Page Setting the preflash cancellation switch Page Pre-flash cancellation settings Switch position Description of settingPage Page Page Page Test Flash Test Pictures Digital Flash-Ready LightPage Page Page Camera with two Digital Flashes How to use the Digital Flash underwater Overexposed pictureAdjusting camera settings Depth Visibility LightDepth Visibility Light Page Using the Digital Flash variable power adjustment Page VI. Tips from the Pro’s Stephen FrinkSTEPHEN’S TIP 1 Minimize Backscatter STEPHEN’S TIP 2 Shrink the Water Column STEPHEN’S TIP 3 Choose the Right Subject STEPHEN’S POINT-AND-SHOOT Workshop Cathy Church CATHY’S TIPCATHY’S TIP Page Page John Chandler JOHN’S TIPJOHN’S TIP VII. Care and Maintenance Page VIII. Glossary Page IX. Trouble Shooting Guide Flash does not fire all the time Dark areas in your pictures Page Page Page Page Item SL972 New! SeaLife Lens Dock Page Page Page XI. Warranty statement and service Español Deutsch Français Italiano