PI SEEK Setting

1Press and hold AUDIO/SETUP (CDE-W235BT only) for at least 2 seconds or press SETUP (CDE-W233R only) to activate the SETUP mode.

2Turn the Rotary encoder to select the TUNER mode, and then press ENTER.

3Turn the Rotary encoder to select PI SEEK, and then press

ENTER.

4Turn the Rotary encoder to select ON or OFF.

5Press and hold AUDIO/SETUP (CDE-W235BT only) for at least 2 seconds or press SETUP (CDE-W233R only) to return to normal mode.

Notes

Press to return to the previous mode.

Pressing and holding for at least 2 seconds will return to normal mode.

If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

Setting the Time to automatically Adjust

When you set to ON, the time is automatically adjusted by RDS data.

1Press and hold AUDIO/SETUP (CDE-W235BT only) for at least 2 seconds or press SETUP (CDE-W233R only) to activate the SETUP selection mode.

2Turn the Rotary encoder to select “TUNER”, and then press

ENTER.

3Turn the Rotary encoder to select “AUTO CLOCK”, and then press ENTER.

4Turn the Rotary encoder to select A-CLOCK ON or

A-CLOCK OFF.

5Press and hold AUDIO/SETUP (CDE-W235BT only) for at least 2 seconds or press SETUP (CDE-W233R only) to return to normal mode.

Notes

Press to return to the previous mode.

Pressing and holding for at least 2 seconds will return to normal mode.

If no operation is performed for 60 seconds, the unit will return to normal mode automatically.

Receiving Traffic Information

1Press and hold BANDTA for at least 2 seconds so that the “TA” indicator lights up.

2Press or to select your desired traffic information station.

When a traffic information station is tuned in, the “TP” indicator lights up.

Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and mute the audio source (CD, FM radio, USB AUDIO, etc.). The display shows “TRF-INFO” for 2 seconds.

When the traffic information broadcast is over, the unit will automatically set in the standby mode.

Notes

If you do not want to listen to the traffic information being received, lightly press BANDTA to skip that traffic information message. The TA mode will remain in the ON position to receive the next traffic information message.

If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized.

In the TA mode, the SEEK tuning selects only the TP stations.

Displaying Radio Text

Text messages from a radio station can be displayed.

Press VIEW while receiving FM in the radio mode to select the Radio Text display.

The display will change every time the button is pressed.

If there is PS (Programme Service Name):

PS (Programme Service Name)* RADIO TEXT 

PS (Programme Service Name)

*If VIEW is pressed and held for at least 2 seconds while displaying PS in the radio mode, frequency will be displayed for 5 seconds.

If there is no PS (Programme Service Name):

FREQUENCY RADIO TEXT FREQUENCY

The display shows “WAITING” for a few seconds, then starts scrolling the text message.

Note

If there is no receivable text message or the unit cannot receive a text message properly, the display shows “NO TEXT”.

13-EN

Page 13
Image 13
Alpine CDE-W233R, CDE-W235BT owner manual PI Seek Setting, Receiving Traffic Information, Displaying Radio Text, 13-EN