Alpine CDE-W233R Setup Before Using, About Bluetooth, Before Using Bluetooth Function, 25-EN

BLUETOOTH Operation (CDE-W235BT only)

Preset buttons	Preset buttons
(1 through 3)	(4 through 6)

1
2
	
			AUDIO/SETUP
		/ENTER	VIEW
BAND/ABC SKIP		Rotary encoder

*The illustration is for CDE-W235BT.

Setup Before Using

About BLUETOOTH

BLUETOOTH is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between BLUETOOTH compatible devices. BLUETOOTH transmission is available in the unlicensed 2.4 GHz spectrum if the distance between devices is within 10 meters. For details, refer to the BLUETOOTH Home page (http://www.bluetooth.com).

Notes

•Depending on the BLUETOOTH version, a BLUETOOTH compatible device may not be able to communicate with this unit.

•Proper function of this unit with all BLUETOOTH compatible devices is not guaranteed. For handling of the BT compatible device, consult your ALPINE dealer or ALPINE website.

•Depending on the surroundings, BLUETOOTH wireless connection may be unstable.

•When you place a call, or perform setup operations, be sure to stop your car in a safe place.

•Depending on the connected BLUETOOTH compatible device(s), the function may differ. Also refer to the Owner’s Manual of the connected device(s).

•When you search this unit using the BLUETOOTH compatible phone, the unit name is displayed as “Alpine CD Receiver” model name.

Before Using BLUETOOTH Function

Before using the BLUETOOTH function, the following settings need to be made.

Set “HFP” or “AUDIO” to ON when you want to use Hands-Free phone or BT Audio function. Refer to “Setting the BLUETOOTH Connection (BT IN)” on page 26.

Note

•Before using BLUETOOTH function, it must be paired with this unit. Refer to “How to connect to a BLUETOOTH compatible device (Pairing)” on page 25.

How to connect to a BLUETOOTH compatible device (Pairing)

For details on the control from a BLUETOOTH compatible device, refer to the Owner’s Manual of the BLUETOOTH compatible device.

Pairing a BLUETOOTH compatible device with SSP (Secure Simple Pairing)

1Using your BLUETOOTH compatible device, select the “Alpine CD Receiver” for pairing.

2Turn the Rotary encoder to change the head unit display from “PAIR NO” to “PAIR YES” and then press ENTER.

If “PAIR NO” is selected, the connection will be cancelled.

3If the pairing was successful, “CONNECTED” is displayed for a few seconds. The head unit then returns to its previous state.

Pairing a BLUETOOTH compatible device without SSP (Secure Simple Pairing)

1Using your BLUETOOTH compatible device, select the “Alpine CD Receiver” for pairing.

2Input the PIN code (“0000”) in a BLUETOOTH compatible device.

Note

• The PIN code is fixed as “0000”.

3If the pairing was successful, “CONNECTED” is displayed for a few seconds. The head unit then returns to its previous state.

Notes

•If the connection is unsuccessful, “FAILED” is displayed.

•After a successful pairing, the two devices should re-pair automatically whenever the vehicle’s ignition is turned ON. However, the re-pairing may fail. If the auto re-pairing fails, try to pair manually.

•Set “VISIBLE M” to VISI M ON to enable this unit to be recognised by a BLUETOOTH compatible device, refer to “Setting the Visible Mode” on page 27.

•You can also manually pair the BLUETOOTH devices from this unit. For details, refer to “Pairing a BLUETOOTH Device from the unit” on page 27.

25-EN