9-EN
*The illustration is for CDE-W235BT.
*The illustration is for CDE-W233R.

Accessory List

• Head Unit. .................................................... .............................1
• Power Cable................... ....................................................... ....1
• Microphone (CDE-W235BT only)................................. ............1
• Mounting Sleeve .................................... ..................................1
• Bracket Key........... ............................................................ ........2
• Face Plate.................. .................................................... ............1
• Rubber Cap ............................................. ..................................1
• Hex Bolt.................................. ...................................................1
• Screw (M5 × 8) ........................................ ..................................4
• Owner’s Manual........................................... .......................1 set

Turning Power On and Off

Press SOURCE to turn on the unit.

Note
• The unit can be turned on by pressing any other button except .

Press and hold SOURCE for at least 2 seconds to turn

off the unit.

Note
• The first time power is tu rned on, the volume will start from level 12.

Source Selection

Press SOURCE to change the source.

TUNER DISC USB AUDIO/IPOD*1 BT AUDIO*2
AUXILIARY*3 TUNER
*1 Only when the iPod/iPhone is connected.
*2 Only for CDE-W235BT.
Only when BT AUDIO is set to ON. Refer to “Setting the
BLUETOOTH Connection (BT IN)” on page26.
*3 Only when AUX SETUP is set to ON. Refer to “Setting the AUX
SETUP Mode” on page23.

Initial System Start-Up

Be sure to press the RESET button when using the unit for the first time,
after changing the car battery, etc.
1

Turn off the u nit p ower.

2

Press RESET with a ballpoint pen or similar pointed object.

Adjusting Volume

Turn the Rotary encoder until the desired sound is

obtained.

Getting Started
SOURCE/
/ENTER
Rotary encoder
AUDIO/SETUP
SOURCE/
/ENTER
Rotary encoder
SETUP