Sealife DC250 manual Setup menu, Land & SEA Exposure Program Setting, Date/Time

Setup menu

Select between Land & Sea exposure programs and other general camera pref- erences in the SET-UP mode. Switch the mode dial to the SET-UP mode and navigate to the option you wish to configure by using the / button.

LAND & SEA® EXPOSURE PROGRAM SETTING

This unique camera offers the option to set the exposure program for land or sea (underwater use)

Land:	select LAND mode when using camera on land
	(above water)
Sea:	select SEA mode when using camera (inside underwater
		E
	housing) underwater
Flash:	select FLASH mode when using camera (inside underwater
	housing) with one or two external flash (es)

•Camera is not waterproof and requires the use of the underwater housing when in or around water

•To confirm Land & Sea Exposure program is set correctly, switch the mode dial to mode

•The bottom left of LCD will display one of the above 3 icons

DATE/TIME

Press the OK button to enter the DATE/TIME sub-menu. Refer to section in this manual titled SETTING THE DATE AND TIME for further detail. After removing the batteries from the camera, the date and time will return to the default set- ting. If this happens, reset the date and time when using the camera.

[YEAR], [MONTH], [DAY], [TIME]

51