Samsung Digimax 301 Manager Install the camera driver correctly, 2000, ME .XP, Controller System

FAQ

Please check the following if the USB connection malfunctions.

[Case 1]	The camera power is off.
	Turn the camera power on. We recommend using an AC power adapter in PC
	mode.
[Case 2]	USB Driver is not installed correctly.
	Install the USB Driver correctly. Refer to page 76.
[Case 3]	The USB cable is not connected or you are using a cable with an incorrect
	specification.
	Use a USB cable with the correct specification.
[Case 4]	The camera is not recognized by your PC.
	Sometimes, the camera may appear under [Unknown Devices] in Device
	Manager.
	Install the camera driver correctly.
	Turn off the camera, remove the USB cable, plug in the USB cable again, and
	then turn on the camera.
[Case 5]	There is an unexpected error during file transfer
	Turn the camera power off and on again. Transfer the file again.
[Case 6]	How do I know my computer supports a USB Interface?
	Check the USB port in your computer or keyboard.
	Check the OS version. A USB Interface is available in Windows 98, 98SE,
	2000, ME .XP.
	Check [Universal serial bus controller] in Device Manager. Do the following to
	check [Universal serial bus controller].
	Win 98/ME	: Trace [Start	Setting	Controller	System	Device
		Manager	Universal serial bus controller]
	Win 2K	: Trace [Start	Setting	Controller	System	Hardware
		Device Manager		Universal serial bus controller].

100