Self-timer( ) / Right button
When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab.
When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Selftimer( ) button. This function is used when the photographer would also like to be in the image.
Selecting the
1.Slide the mode switch to the STILL IMAGE or MOVIE CLIP mode.
2. Press the
A 2 second, 10 second or double
2SEC
Pressing the shutter button will allow an interval of 2 seconds before the image is taken.
10SEC self-timer ( ) :
Pressing the shutter button will allow an interval of 10 seconds before the image is taken.
Double | ) : |
A picture will be taken after about 10 seconds and 2 seconds later a second picture will be taken.
When using the flash, the
delayed for longer than 2 seconds depending on the flash charge time.
3.When you press the SHUTTER button, the picture will be taken after the specified time has elapsed.
INFORMATION
When taking a picture using the
2 second
10 second
It blinks at 0.25 second intervals for the remaining 3 seconds.
If you operate the Power button, Mode switch,
30