Samsung 300 manual # of prints

Setting up the play back function using the LCD monitor

# of prints

This function allows you to embed print quantity information on your memory card.

Images can then be printed on DPOF printers, or at an increasing number of photo laboratories.

This function is not available for Movie clips. The DPOF file is only stored on the card.

1.Rotate the mode dial to the PLAY mode and press the MENU button.

2.Press the UP()/ DOWN () button and select [# OF PRINTS].

3.Press the SET() button and the sub menu will display.

4.Select the number that you want by pressing the UP()/DOWN()button and press the SET() button to confirm the setting.

5.Print the setting indicator and the number of prints will be displayed on the LCD monitor after pressing the SET button.

Selectable the number of prints : 0 ~ 9

(If you select ‘0(zero)’, you can’t print an image.)

PLAY

DELETE

SLIDE SHOW2 SEC

PROTECTUNLOCK

# OF PRINTS X0

EXIT:MENU CHANGE:

PLAY

# OF PRINTS

X1

EXIT:MENUSET:

PLAY

57