Samsung 300 manual Starting the Setup mode, Beep

Starting the SETUP mode

Rotate the mode dial to the SETUP mode, allowing you to set up the basic camera settings.

Beep

A beep will sound when you press the camera button and you can check the camera conditions.

1.Select the SETUP mode by rotating the mode dial.

2.[SETUP 1/2] menu will be displayed.

3. Select [BEEP] by pressing the UP( )/ DOWN ( ) button.

4.Press the SET() button and the sub menu will be displayed.

5.Press the UP()/ DOWN () button and select [ON] or [OFF]. Press the SET() button to confirm the setting.

6.The default is [ON].

SETUP	1/2
BEEP	ON
POWER OFF	10 MIN
DATE IMPRINT	ON
DATE TYPE	YMD
MOVE PAGE:
SETUP	1/2
BEEP	ON
POWER OFF	10 MIN
DATE IMPRINT	ON
DATE TYPE	YMD
	CHANGE:
SETUP	1/2
BEEP

ON

OFF

EXIT:MENUSET:

58