Samsung 300 manual Power off

Starting the SETUP mode

Power off

This function switches the camera off after a set amount of time in order to prevent unnecessary battery drainage.

You can set the power to switch off at any specified time( 1 ~ 10MIN, 1MIN interval) from the last operation.

If you select [CANCEL], the power off function will not operate.

Note that the automatic power off does not operate if the camera is in slide show or playing a movie clip.

1.Select the SETUP mode by rotating the mode dial.

2.[SETUP 1/2] menu will be displayed.

3.Press the UP ()/ DOWN () button and select [POWER OFF].

4.Press the SET() button and the sub menu will be displayed.

5.Select the desired sub menu by pressing the

UP()/ DOWN () button. Press the SET( ) button to confirm the setting.

6. The default is [1 MIN].

SETUP	1/2
BEEP	ON
POWER OFF	10 MIN
DATE IMPRINT	ON
DATE TYPE	YMD
	CHANGE:
SETUP	1/2
POWER OFF

10 MIN

EXIT:MENUSET:

INFORMATION

Even if the batteries or AC adapter are removed and inserted again, the power off setting will be preserved.

SETUP

59