Using the macro mode
Use the macro mode to shoot a
1. | Open the lens cover, turn the mode dial to |
| mode, and power on the camera. |
2. | Move the focus switch located on the front |
| side of the camera to the position. |
| The icon appears on the LCD monitor . |
3. | Compose the picture. |
4. | Press the shutter button. |
To disable macro photography, slide the |
|
focus switch back to portrait mode or |
|
landscape mode. | E |
•When shooting a
•After a macro shot is taken DO NOT FORGET to reset the lens to the normal position.
Using the flash
The flash is designed to function automatically when lighting conditions warrant the use of flash. You can take an image using a flash mode suitable to your circumstances. If you change the flash mode, the camera will retain that setting even if the camera is turned off.
1. Open the lens cover, turn the mode dial to
mode, and power on the camera.
2. Press the button located on the rear side of the camera repeatedly until your desired flash mode appears on the LCD monitor.
3.Compose the picture and press the shutter button.
21