Protecting one image/video clip
You can protect the image/video clip you prefer from being accidentally erased by using the protect function in the Playback menu. Follow the steps below to perform protect function:
Protecting one image/video clip
1.Turn the mode dial to 
mode and power on the camera.
The last image/video clip appears on the LCD monitor.
2.Select the image/video clip you wish to pro- tect by using the 
/ 
button.
3. Press the 
button. Select Protect by using the 
/ 
button.
4.Press the 
button. Use the 
/ 
button to select One image and then press the
button.
To protect all images, select All images in this step.
5.Select Lock by pressing the 
/ 
button and then press OK.
Once the image/video clip is protected,
the protection icon will display on the pro- tected image/video clip.
Removing protection from one image/video clip
1.Perform the steps above 1 to 4 in "Protecting one image/video clip".
2.Select Unlock by pressing the 
/ 
button and then press OK.
E
•To erase the protected image/video clip, use the format function. For more information about formatting, refer to Format in the Playback menu.
27