Using the Self-Timer | Vivitar Vivicam 3735 manual

You can choose one of these flash options:

Auto		When recording in a dark place and backlit conditions, the
		camera will automatically determine whether the flash
		is necessary
Red-eye Reduction		Pre-flash is performed before the main flash to reduce the
		red-eye; an effect caused by light reflected from the retina.
		Used in low light conditions when photographing people
		or animals. The pre-flashes contract the pupils of the
		subject’s eyes.

Fill-in		Used to soften dark shadows on the face of the subject due
		to back light, strong direct light or sunlight. The flash will
		always be used regardless of the surrounding brightness.

Off		Used when recording in a place where flash photography
		is prohibited, or when utilizing the night view or indoor
		lightning for recording. The flash will always be off during
		recording.

To select a flash option, toggle the Flash button until you see its icon appear on the status LCD.

Using the Self-Timer ( )

If you need to take a group picture including yourself or a solo picture but no one is there to help you, use your camera's Self-Timer. The Self-Timer provides a 10-second delay between the time you press the Shutter button and the time the picture is taken, giving you just enough time to run in front of the camera to include yourself in the picture.

Self-Timer works in Capture mode

only. To enable the Self-Timer, turn the dial knob to one

of these three modes:(

), then do the following:

1.Press the LCD button to turn on the LCD monitor.

2.Press Menu button to display the menu screen on LCD monitor.

3.Press

button repeatedly until the Camera Menu

screen appears.

4.Press

button to select the SELF-TIMERoption.

5.Press

button to turn ON the Self-Timer.

6. Press Menu button to exit from menu screen.

7.Press the shutter button. A red LED will then flash for 10 seconds and beep at the final three seconds. Afterwards, the camera will beep once, indicating that the picture is taken.

Note:

The Self-Timer is automatically turned off after the picture is taken or if the camera is powered off.