Using the Vivicam | Vivitar ViviCam 3345 specification

USING THE VIVICAM 3345

Powering the Camera ON/OFF

∙To turn the ViviCam 3345’s power ON, press and hold the button for three to four seconds. The camera will beep and the status LCD will display camera status information.

∙To turn the ViviCam 3345’s power OFF, press and hold the button for three (3) seconds and the status LCD will shut off.

Note: The ViviCam 3345 automatically powers off after 60 seconds of inactivity.

Camera Icons and Descriptions

The Power/Mode Button

Icons	Descriptions

	Capture Mode for capturing digital still images

	Number of images that you may capture in the available memory

	Movie Mode for capturing video clips

	Time (maximum duration) of a video that may be captured in the available
	memory

	Resolution settings for still images
	?	? ?	1600 x 1200 (2 mega-pixel images, using internal interpolation)
	?	?	1280 x 1024 (native 1.3 mega-pixel resolution of the camera)
	?		640 x 480 (VGA, reduced resolution – for capturing more images)

Self-timerallows 10 seconds to capture an image

Note: The self-timer function uses two-star (1280 x 1024) resolution setting ONLY

Battery level indicator:

3 segments: battery is full

2 segments: battery is half full

1 segments: battery is low; flash is disabled

0 segments: battery is near empty; the icons on the status LCD will flash

PC / Web Cam mode. Set the camera to “PCC” before connecting to your PC to use the PC camera function.

PC-connection– camera is connected to a computer with the USB cable