FujiFilm 38-125mm owner manual Setting the Date YEAR-MONTH-DAY/ HOUR-MINUTE

Page 13

1

SETTING THE DATE (YEAR-MONTH-DAY/ HOUR-MINUTE)

Setting the date

Turn the camera on and then press the DATE button.

The “Year” blinks and the camera will enter the date/time setting mode. You can set:

Year : ’02 to ’32 (2002 to 2032)

Month : 1 to 12 Day : 1 to 31

Time : 0 to 23 hours; 00 to 59 minutes

2

12

1Press the SET button to change the blinking setting.

2Press the SEL button to select the next part of the date/time information.

Each press of the SEL button selects a different element in the date/time information in the

following order:

YearMonthDayHoursMinutes

13

Image 13
Contents Page Features ContentsPart Names → p.23 Page Liquid Crystal Display Viewfinder Attaching the Strap Preliminary StepsInserting the Battery Page Turning on Your Camera Checking Your Battery Setting the Date YEAR-MONTH-DAY/ HOUR-MINUTE Page Day blinks and the date change mode is entered Selecting the Date Mode Loading the Camera Using Your CameraOpen the camera back as shown Page Close the camera back Using Your Camera Page Press down the shutter release button halfway Page Page Using the AUTO-FOCUS Lock Check that the AF lamp green lights up Unloading the Film or Removing Film in MID-ROLL When rewinding is complete, the exposure counter will read Film cannot be reused once it has been rewound Advanced Techniques Selecting the Exposure Mode→ → Using color negative film No display Automatic flash at low brightness mode Dealing with red-eye Back light compensation flash mode Landscape mode Night portrait slow sync mode Press the button Using the SELF-TIMERPage Transmitter Shutter release button Using the Remote ControllerPage 11.5 ft During operation Problems Possible Causes Solutions Trouble ShootingPrinted pictures Problems Possible Causes Solutions Common Sense Camera Care Viewfinder SpecificationsPower Supply Important Safety Notice Page FGS-103112-Ci-01