FujiFilm 38-125mm owner manual

Page 25

There are a few conditions when the camera’s autofocus system may not function accurately. At these times, you should use the “Auto-Focus Lock” settings (p.26) or the “Landscape Mode” setting (p.37). Conditions requiring these settings include:

A bright light source within the picture such as the sun near your subject, a strong light reflection such as from water or from the windshield of a car;

A mirror or other strongly reflective surface near the center of the picture;

Shooting black light-absorbing subjects such as hair;

Presence of flames, smoke or gaseous substances;

Photographing through glass.

25

Image 25
Contents Page Features ContentsPart Names → p.23 Page Liquid Crystal Display Viewfinder Attaching the Strap Preliminary StepsInserting the Battery Page Turning on Your Camera Checking Your Battery Setting the Date YEAR-MONTH-DAY/ HOUR-MINUTE Page Day blinks and the date change mode is entered Selecting the Date Mode Loading the Camera Using Your CameraOpen the camera back as shown Page Close the camera back Using Your Camera Page Press down the shutter release button halfway Page Page Using the AUTO-FOCUS Lock Check that the AF lamp green lights up Unloading the Film or Removing Film in MID-ROLL When rewinding is complete, the exposure counter will read Film cannot be reused once it has been rewound Advanced Techniques Selecting the Exposure Mode→ → Using color negative film No display Automatic flash at low brightness mode Dealing with red-eye Back light compensation flash mode Landscape mode Night portrait slow sync mode Press the button Using the SELF-TIMERPage Transmitter Shutter release button Using the Remote ControllerPage 11.5 ft During operation Problems Possible Causes Solutions Trouble ShootingPrinted pictures Problems Possible Causes Solutions Common Sense Camera Care Viewfinder SpecificationsPower Supply Important Safety Notice Page FGS-103112-Ci-01