FujiFilm 38-125mm owner manual Printed pictures Problems Possible Causes Solutions

Printed pictures

Problems	Possible Causes	Solutions		Page
Picture is not sharp.	1 Was your finger on the AF windows	1 When shooting a picture, hold your camera cor-		21
	when shooting?	rectly so that your finger is not on the AF windows.
	2 Did you aim the subject properly?	2 Compose the picture in the AF frame and shoot,		26
		or shoot using AF Lock.
	3 Is the lens dirty?	3 Clean the lens.		46
	4 Is the camera moving?	4 Hold the camera firmly and press the shutter re-		21
		lease button gently. Use a tripod for slow shutter
	5 You selected mode when shooting	speeds.	mode.
		5 Select a mode other than		31
	at a close distance.
Picture is too dark.	1 Subject was too far from the camera	1 Shoot within specified coverage distance of elec-		33
	for flash photography in a dark place.	tronic flash.
	2 Was your finger over the flash?	2 Do not cover the flash with your finger.		21
	3 Was the subject backlit from being	3 Turn on mode and press the shutter release but-		36
	taken next to a window, etc.?	ton.
Printed date/time is incor-	● You didn’t set correct date and time af-	● Set date and time after replacing battery.		13
rect.	ter replacing battery.
The date is not printed on	1 Wasn’t “- - - - - -” selected before tak-	1 Select a date mode other than “- - - - - -” before		16
the front./The date is not	ing pictures?	taking pictures.
printed clearly.	2 Is there something light-colored (white,	2 Try to arrange that there is nothing light-colored		16
	yellow, orange) where the date ap-	where the date appears.
	pears?

45