Kaidan KiWi-L, KiWi+ manual

Page 9

Push the axle through the bearing and plate as shown below. Reverse the disassembly.

Replace the cap by threading the cap onto the axle as shown below. Continue to thread the cap so that there is no free play in any of the pieces and to compress the rubber washer slightly.

When the friction drag feels adequate, turn the Friction cap so that the knob is aligned with one of the flats on the axle. Tighten the knob to lock.

Page - 9

Image 9
Contents Photographic VR Panoramic Tripod Head Copyright Information Unpacking the BOX Assembling the KiWiAttaching the Vertical Bracket Attaching Your Camera Using the KiWiRemoving the Friction CAP Page Page Page Removing the Detent Disc HOW do I Locate MY Nodal Point ? Using the KiWiSlightly Harder Part Fore-Aft Ad- justment Proves as you slide the bracket Record Your Results Amount you turn the camera for each shot varies. It is Taking Photos with the KiwiTaking the Photos Appendix a List of Lens FOV versus Number of Shots Camera Adjustment Lug Addendum