Kaidan KiWi+, KiWi-L manual Removing the Detent Disc

Page 10

The spring plunger that provides the detent action can also be adjusted to vary the force of the click action. Use a flat blade screw driver to move the plunger in and out as desired. A con- venient way to adjust the plunger is to screw the plunger all the way in, until it bottoms out. Then unscrew the plunger about one turn.

Removing the Detent Disc

Once the indexing hub is removed, the detent disc can be re- moved from its recess in the bottom of the horizontal bracket.The disc may slip out once the indexing hub is removed. If it sticks inside the recess, simply insert the tip of a small ball point pen or a pin into the detent disc ejection hole on top of the bracket and push the disc out of the detent disc recess.

Page - 10

Image 10
Contents Photographic VR Panoramic Tripod Head Copyright Information Assembling the KiWi Unpacking the BOXAttaching the Vertical Bracket Using the KiWi Attaching Your CameraRemoving the Friction CAP Page Page Page Removing the Detent Disc Using the KiWi HOW do I Locate MY Nodal Point ?Slightly Harder Part Fore-Aft Ad- justment Proves as you slide the bracket Record Your Results Taking Photos with the Kiwi Amount you turn the camera for each shot varies. It isTaking the Photos Appendix a List of Lens FOV versus Number of Shots Camera Adjustment Lug Addendum