Miller Camera Support DS5, DS10, DS20 manual Features and Controls

Page 2

Features andControls

1/4” and pin carriage

Sliding camera plate

Slide lock

Tilt lock

Tilt drag

Pan handle clamp

Counterbalance selector

Pan lock

Pan drag

75mm claw ball

Clamp nut

2	Fig 1.1	Fig 1.2
2	DS5	DS10

Image 2

Contents DS5/DS10/DS20 Fluid Head Operator’s Manual Features and Controls Introduction Handle MountingCamera Set-up Operating InstructionsFluid Head Set-up 4 screws which is standard mounting for Dvcam see Fig1.3Platform see step TIP Fine tuning can be achieved By adjusting the SlidingIs partially applied Operating Instructions Pan / Tilt Drag Control CleaningMaintenance Storage5.0 5.5 10.0 11.0 Camera Platform Type Technical DataUp to 2.5 5.0 5.5 40˚/+65˚ -40˚ / +149˚#489 Miller sales or service centre#490 Pin carriage #493 Camera Screw 1/4