Miller Camera Support DS10 Operating Instructions Pan / Tilt Drag Control, Cleaning, Storage

Page 6

Operating Instructions

5.Pan / Tilt Drag Control

5.1The DS10/DS20 fluid head provides adjustment for tilt and pan drag control (Fig 4.). Rotate clockwise to engage friction resistance, anticlockwise to return to fluid action.

Note: The fluid drag plate system has been designed to suit most operating conditions. The friction drag adjustment should only be utilised when extra resistance is required.

Cleaning

The DS5/DS10/DS20 fluid head features protective coatings, dust seals and anti-corrosive fittings to ensure long and trouble-free operation in extreme location conditions. To ensure optimum performance throughout the life of the head Miller recommends regular cleaning.

When the fluid head has been used in harsh environments (such as sand, mud or salt water spray), wipe over with a soft damp cloth as soon as possible. Use a soft brush to clean crevices. Remove and clean CAMERA PLATE.

WARNING: Do not immerse a fluid head in any liquid.

WARNING: Do not use stiff brushes, abrasives or solvents.

Fig 4

Drag control knobs

Storage

When storing for extended periods: clean fluid head and place in a safe, dry place, away from direct sunlight. The fluid heads can be stored horizontally or upright. However, it is not advisable to leave the head for extended periods with the tilt locked in an extreme position, either forward or backward.

Maintenance

With the exception of cleaning, the DS5/DS10/DS20 fluid head does not require additional maintenance. Miller recommends periodic servicing by a Miller Authorised Service Agent. Miller Authorised Service Agents must carry out all service and repair work. Failure to observe this requirement may void warranty.

6

Image 6
Contents DS5/DS10/DS20 Fluid Head Operator’s Manual Features and Controls Introduction Handle MountingCamera Set-up Operating InstructionsFluid Head Set-up 4 screws which is standard mounting for Dvcam see Fig1.3TIP Fine tuning can be achieved By adjusting the Sliding Is partially appliedPlatform see step Operating Instructions Pan / Tilt Drag Control CleaningMaintenance Storage5.0 5.5 10.0 11.0 Camera Platform Type Technical DataUp to 2.5 5.0 5.5 40˚/+65˚ -40˚ / +149˚#489 Miller sales or service centre#490 Pin carriage #493 Camera Screw 1/4

DS10, DS20, DS5, DS10, DS20 specifications

Miller Camera Support offers a renowned range of camera tripods, pivotal for modern cinematography, with notable models including the DS5, DS10, and DS20. Each of these tripods is designed to meet the dynamic needs of film and television production, providing stability, versatility, and precision in various shooting environments.

The Miller DS5 is an entry-level tripod that impresses with its robust build and lightweight design. It features a 5-position counterbalance system, allowing users to achieve the perfect balance for their camera setup. This adaptability is essential for operators working with different camera weights and sizes. The DS5 is also equipped with a fluid drag system for both pan and tilt movements, ensuring smooth and controlled motion during filming. Its high-quality aluminum construction guarantees durability while maintaining a manageable weight for easy transport.

Moving up the line, the DS10 offers enhanced capabilities for mid-range productions. This model boasts a higher payload capacity, accommodating heavier camera rigs without compromising stability. The DS10 features an advanced 7-step counterbalance system, which provides precise control over camera tilt. Its fluid drag system allows for fine adjustments in motion, ensuring professional-grade videography. Additionally, this tripod incorporates a quick-release plate that simplifies the camera setup process, saving valuable time on set.

The DS20 represents the pinnacle of Miller's tripod offerings, designed for the most demanding cinematic applications. This robust tripod is constructed from high-quality materials, capable of supporting large camera payloads and accessories. The DS20 features an advanced 8-step counterbalance system that allows for optimal adjustment based on the camera weight and configuration. This model also includes a superior fluid drag system, providing exceptional control for intricate shots. Its durable design ensures reliability even in challenging environments, making it a favorite among professional cinematographers.

All Miller tripods come equipped with intuitive features like a bubble level and adjustable rubber feet for added stability on uneven surfaces. The interchangeable camera plate designs across models enhance versatility, while the lightweight construction facilitates mobility. With their commitment to innovation and performance, the Miller DS range continues to set the standard for camera support solutions in the film industry.