Split or rotated image is printed | Califone DC596 instruction

The Main Toolbar in the Camera tab has the following buttons:

Print	Prints the image displayed on the
	screen via the default printer. When a
	moving image is displayed on-screen,
	the computer freezes the frame and
	sends it over to the printer. However,
	when the window is split, or when the
	image is rotated, the original image (not
	the split or rotated image) is printed.
Split Screen	Splits the screen in two, showing the
	captured image on the left and the
	original image on the right. This is a
	good mode to compare one image to
	another.
Focus	Automatically refocuses the image.
Freeze/	To freeze the movement in front of
Release Frame	the camera. This can also be done by
	pressing the F5 key.
Capture	To create a still image and make
	corrections i.e., crop, flip, sharpen,
	brighten, etc.
Record Movie	To make a simple movie clip of 10
	minutes or less. When going to the
	movie recording screen, the resolution
	changes to 640 × 480. For a smaller
	footprint, try going down to 320 × 240.
Enlarge	Zoom-in functionality. May also press
	the “+” key.
Shrink	Zoom-out functionality. May also press
	the “-“ key.
Rotate	Rotates the image 90 degrees to the
Clockwise 90o	right.

Pen	To write on-screen as you would on a
	blackboard.
Full Screen:	Enlarges the screen to fit the monitor.
	Pressing <Ctrl-Enter> does the same.
	Press it again to restore it to the
	original size.
Lock/Unlock	Locks the toolbar. Notice that the Lock
	icon is grayed out when first launched;
	it becomes golden (active) when the
	screen is enlarged to fit the monitor.
	Click it to unlock the toolbar so as
	to hide the toolbar when moving the
	mouse pointer away from the toolbar.
Top/Bottom	Changes the position of the toolbar,
Icon	from the top of the screen to the
	bottom. The toolbar cannot move
	sideways. (shortcut: Ctrl-M)

DiggiDitto™ DC596—Smart Camera with Image Recognition

the split or rotated image) is printed.