4.5 Make Tab
From the Make tab, you can create a presentation with the DC596 image recognition software.
To begin, place an image under the DC596. The image will incite the DC596 software to play or link up to eight different kinds of files. The recognized images are located in the top and bottom half on the left side. The alternate images are those images shown when an image is recognized. It is possible to have five additional images. The lower right side of the Make tab shows the linked files.
The main toolbar of the Make tab has the following buttons.
New: Opens up a new project folder.
Open: Opens an already existing project to add or delete links.
visit us online at califone.com
Save: | Saves after adding a new project folder or |
| adding/deleting files after opening a project |
| folder. |
Focus: | Refocuses an |
Pen: | Enables you to write onscreen as one writes on |
| a blackboard (refer to Section 4.3 for further |
| information). |
Full | Maximizes the screen size to fit the full screen. |
Screen: | Pressing |
| Press it again to return to the original size. |
| Pressing the ESC key when in Full Screen mode |
| restores the window size as well. |
Top/ | Changes the position of the toolbar (up or |
Bottom | down). You cannot move the toolbar to the right |
Icon: | or to the left. (shortcut: |
As soon as you open the Make tab, you will see five different panes: Camera, Selected Image, Recognized Images, Link Files, and Add Alternate Images panes. The camera sees the Camera pane. A different image/object can be placed in front of the camera and will show up on the Camera pane. When pressing the Capture button in the Camera pane, the image is captured to the Selected Image pane and is placed in the Recognized Images pane. A recognized image may be chosen by pressing the Add Recognized Images button and selecting an image from an individual collection.
visit us online at califone.com
26 | DiggiDitto™ | DiggiDitto™ | 27 |