Loading the battery

Please use two AA batteries.

1.Slide open the battery compartment cover as indicated.

2.Load the batteries into the battery compartment with + and - ends correctly installed.

3.Replace the cover.

open

Inserting the SD/MMC card (optional)

1.Lift the SD card cover.

2.Insert the card in the direction of indication until it reaches the end of the slot.

3.When using a SD card, the built-in memory will become inaccessible.

4.To remove the SD card, gently push the card until it pops up.

The serial number of the ﬁle name (PICTxxxx) will be counted even after you delete all your ﬁles on the SD card or insert a new one. If you want to restart the serial number, please use the camcorder “Format” function to format the card.