AIPTEK 3300 user manual Inserting the SD/MMC card optional, Your Camera

Inserting the SD/MMC card (optional)

In addition to 16MB (128Mbits) built-in flash memory, your camera can store data on a Secure Digital (SD) card or a MultiMedia card (MMC). The supported memory size ranges from 8MB to 256MB.

To insert a SD/MMC card, gently push the card as indicated until the card reaches the end of the slot. Note that once a SD/MMC card is inserted, the camera will use the card as the main storage media. Files stored in the camera's built-in memory will become inaccessible until the SD/MMC card is removed.

The SD card comes with a write-protect switch. When the
write-protect switch is set to the Lock position, the card		Preparing
will become non-writable. To ensure that the camera can
operate normally, you should set the write-protect switch
to the Unlock position before inserting the SD card.		Your Camera
	Unlock
	Lock

‹To remove the SD/MMC card, gently push the card. After the card pops up, pull the card out of the slot.

‹Do not remove the SD/MMC card while the camera is processing data (when the LED is flashing).

‹If you insert a write-protected card, the media icon on the LCD display will become red.

~ 5 ~