AIPTEK 3300 user manual Setting the date and time, Time

Setting the date and time

When you power on the camera for the first time, you need to set up the date and time:

1. Set the Mode Switch to Setting mode.

4.Repeat step 2 and enter the Time sub-menu. Use the same method described in step 3 to set time. Note that the second digits are not adjustable. After the correct time has been set up, press the OK button to confirm the setting.

Time

12 : 00 : 00

Getting Started

2.Press the Up or Down button to highlight Date, and then press the OK button or the Right button to enter the sub-menu.

Setting

Beep ON

Boot-up ON

Auto Off 10m

Date 03/01/01

Time 12:00

‹While operating the camera, pressing the Menu button can bring up a sub-menu under most circumstances. The menu items vary according to the mode you select. When a sub- menu is being shown on the screen, you can use the illustrated function buttons to make your selection.

3.Press the Left or Right button to move the cursor. Press the Up or Down button to change the value. After the correct date has been set up, press the OK button to confirm the setting.

Date

Move Cursor Up

Cancel

2003 / 01 / 01

Cancel/Exit

~ 9 ~

Confirm

Move Cursor Down

Confirm