Installing the driver (for 98SE) (continued)
3.The Install Shield Wizard will then appear and automatically install the
program. Please click on Next to continue the installation.
5.After the installation is completed, you may need to restart your computer for the driver to take effect.
4.After the driver installation is completed, the program will prompt you to install Direct X 8.0 or above. If you are not sure if this program has been installed in your computer, please click Yes to continue.
The program Direct X 8.0 or above is necessary for viewing the AVI movies recorded by the camera.
After rebooting your computer, please connect the camera to the PC and select DISK (removable disk) mode to capture the device.
Copying Files to PC
~ 36 ~