Argus Camera RW-1 manual Loading Batteries, Arrow

Page 18

GETTING ACQUAINTED

Loading Batteries

Make sure that camera power is turned off whenever loading or replacing batteries.

1.Turn the camera over, and

slide the battery cover in the direction indicated by the

l Battery Life Guidelines

The battery life guideline values given below indicate the amount of time at standard temperature (25C) until power automatically turns off due to battery failure. They do not guarantee that batteries will provide the amount of service indicated. Low temperatures and continued use reduce bat- tery life.

arrow in the illustration to open it.

2. Load batteries as shown in the illustration, and

then close the battery cover by pressing down

Type of Operation

Continuous Playback

Continuous Recording

AA-size Alkaline

AA-size Lithium

AA-size Ni-MH

Batteries LR6

Batteries FR6

Batteries NP-H3

140 minutes

300 minutes

160 minutes

 

 

 

120 minutes

290 minutes

150 minutes

(720 shots)

(1740 shots)

(900 shots)

on it as you slide it in the direction indicated by

the arrow.

18

The above figures are approximations only.

The above guidelines are based on the following battery types:

Alkaline: MX1500 (AA) DURACELL ULTRA

Lithium: Energizer

Figures are based on continuous recording under the fol- lowing conditions.

Flash turned off

Normal temperature (25C)

Recording one image per minute under the above condi- tions reduces battery life to about one sixth of that noted above.

Battery life is greatly affected by how much you use flash, zoom and other functions, and how long you leave power turned on.

¥¼©R¦W-3

Page 18

2002/6/18, AM 10:56Adobe PageMaker 6.5C/Win

Image 18
Contents Users Guide Introduction UnpackingContents Playback Reference Features General Precautions PrecautionsData Error Precautions Operating conditionsLens Precautions CondensationAbout the camera’s backlight FCC Warning Getting Acquainted FrontGeneral Guide Back Side BottomREC mode Monitor Screen IndicatorsPlay mode Indicator LampsUsing the Soft Case Attaching the StrapPower Requirements Loading Batteries ArrowGetting Acquainted Battery Handling Precautions Cell batteries with this cameraLow Battery Indicator Using AC Power Turning the Camera On and Off Power Save Settings Setting the Current Date and TimeSetting the Date and Time CursorExample October 18 Recording Images Recording a Simple SnapshotCompose the image on the monitor screen About the REC Mode Monitor Screen Recording PrecautionsUsing Zoom Using the Flash Flash Status Indicators Precautions when Using FlashRecording Images Recording Macro Images Using the Optical Viewfinder Recording Consecutive Images Continuous Shutter ModePress Menu or select Exit and then press SET Setting the Maximum Number of Shots Using the Self-TimerCompose the image and then press the shutter release button To specify the image size To specify the image qualitySpecifying Image Size and Quality Size/Quality Setting and Image Capacity Exposure CompensationPress Menu or select Exit and then press SET Selecting White Balance Checking an Image You Just RecordedUsing a Memory Card To insert a memory card into the camera To remove a memory card from the cameraTo format a memory card Memory Card Precautions To copy flash memory images to a memory card Playback Basic Playback OperationZooming the Displayed Image Using the Slide Show Feature Playback Deleting Images Deleting a Single ImageTo exit the image delete procedure, press Menu Deleting All Unprotected Images SETManaging Images FoldersFolders and Files Files To protect or unprotect a single imageProtecting Images Against Deletion To exit the image protect procedure, press Menu To protect or unprotect all images To print selected images DpofO e x i t t h e p r i n t To print all images Print Image Matching Other Settings Turning the Monitor Screen Indicators On and OffChanging the Display Language Turning the Confirmation Tone On and Off Selecting the USB Mode Select the setting you want and then press SETPC Camera Connecting to External Equipment Connecting to External EquipmentSelecting the Video Output Signal Mode Connecting to a TelevisionUSB Connection Transferring Images to a ComputerConnecting the USB Cable Disconnecting the USB Cable Using a Memory Card to Transfer Image DataMemory Card Data DCF ProtocolMemory Card File Structure Image Files Supported by the CameraPrecautions when Using a Memory Card on a Computer Using the PC Camera Mode To connect the camera as a PC cameraPC Camera Mode Precautions Connecting to Your ComputerOther Requirements Reference Camera MenusIndicator Lamp Reference Reference Play mode Troubleshooting Reference Finder Error Display MessagesMemory for Specifications Seconds, 2 seconds Reference Software Driver Installation Guide Install USB driver for Mac Loading Image by USB Cable By Software from Photo Suite