Argus Camera RW-1 manual Reference

Page 87

REFERENCE

This camera does not have a separate battery to power its clock. Clock settings are cleared whenever power to the camera is cut off (by batteries going dead while the camera is not connected to an AC power outlet with the AC adaptor) for about 12 hours. After power is resumed, either by loading fresh batteries or connecting to an AC power outlet, you will have to set the correct date and time again.

The liquid crystal panel built into this camera is the product of pre- cision engineering, with a pixel yield of 99.99%. This also means, however that 0.01% of the pixels can be expected to fail to light or to remain lit at all times.

87

¥¼©R¦W-10

Page 87

2002/6/18, AM 11:46Adobe PageMaker 6.5C/Win

Image 87

Contents Users Guide Unpacking IntroductionContents Playback Reference Features Precautions General PrecautionsOperating conditions Data Error PrecautionsLens Precautions CondensationAbout the camera’s backlight FCC Warning Getting Acquainted FrontGeneral Guide Back Bottom SideMonitor Screen Indicators REC modeIndicator Lamps Play modeAttaching the Strap Using the Soft CasePower Requirements Arrow Loading BatteriesGetting Acquainted Cell batteries with this camera Battery Handling PrecautionsLow Battery Indicator Using AC Power Turning the Camera On and Off Setting the Current Date and Time Power Save SettingsCursor Setting the Date and TimeExample October 18 Recording a Simple Snapshot Recording ImagesCompose the image on the monitor screen Recording Precautions About the REC Mode Monitor ScreenUsing Zoom Using the Flash Precautions when Using Flash Flash Status IndicatorsRecording Images Recording Macro Images Recording Consecutive Images Continuous Shutter Mode Using the Optical ViewfinderPress Menu or select Exit and then press SET Using the Self-Timer Setting the Maximum Number of ShotsCompose the image and then press the shutter release button To specify the image size To specify the image qualitySpecifying Image Size and Quality Exposure Compensation Size/Quality Setting and Image CapacityPress Menu or select Exit and then press SET Checking an Image You Just Recorded Selecting White BalanceUsing a Memory Card To remove a memory card from the camera To insert a memory card into the cameraTo format a memory card Memory Card Precautions To copy flash memory images to a memory card Playback Basic Playback OperationZooming the Displayed Image Using the Slide Show Feature Playback Deleting a Single Image Deleting ImagesTo exit the image delete procedure, press Menu SET Deleting All Unprotected ImagesManaging Images FoldersFolders and Files Files To protect or unprotect a single imageProtecting Images Against Deletion To exit the image protect procedure, press Menu To protect or unprotect all images Dpof To print selected imagesO e x i t t h e p r i n t To print all images Print Image Matching Other Settings Turning the Monitor Screen Indicators On and OffChanging the Display Language Turning the Confirmation Tone On and Off Select the setting you want and then press SET Selecting the USB ModePC Camera Connecting to External Equipment Connecting to External EquipmentConnecting to a Television Selecting the Video Output Signal ModeTransferring Images to a Computer USB ConnectionConnecting the USB Cable Using a Memory Card to Transfer Image Data Disconnecting the USB CableDCF Protocol Memory Card DataImage Files Supported by the Camera Memory Card File StructurePrecautions when Using a Memory Card on a Computer To connect the camera as a PC camera Using the PC Camera ModePC Camera Mode Precautions Connecting to Your ComputerOther Requirements Camera Menus ReferenceIndicator Lamp Reference Reference Play mode Troubleshooting Reference Finder Display Messages ErrorMemory for Specifications Seconds, 2 seconds Reference Software Driver Installation Guide Install USB driver for Mac Loading Image by USB Cable By Software from Photo Suite