E. These are the lubrication points for the delay mechanism. For every speed from 25 to 150, this mechanism delays the shutter blades to ensure that the shutter blades remain open for the appropriate amount of time. If your shutter blades do not close properly when set to 25 speed but work well on 150 speed, the problem most likely lies here. Unlike in the
F. This lever rides on a cam on the Face Plate. When you rotate the Face Plate to set the shutter speed to B(ulb) or T(ime), this lever sets the mechanism in A to the proper position.
G. This lever also rides on a cam on the Face Plate. It controls the shutter speed from 25 to 150.
Fig. 7-6: The post-war Shutter with the Face Plate removed.
Download this book for free at http://www.TheArgusA.com/
53