Advanced Global Technology QSP-660 manual Display

Sequence Set Up

A unique feature of the QSP-660 isAdvancedthe option Technologyto customize Video,the displayInc.sequence format to suit your application. You can program a specific selection of cameras for sequencing.

Selecting:			Display Sequence Set Up
1.	Enters edit mode for hold (dwell) time.
While editing:			1: Hold Each Image for: 3 Sec.
			2: Full Camera Call Up . . .
1 - 4		Used to enter digits 1 through 4
			3: Quad . . .
5 - 6		VCR + 1-2	4: PIP . . .
DISPLAY		Completes the entry if less than three digits	5: Dual PIP . . .
		and returns to the previous value if no	6: Split/Squish
		digits are entered.	PIP: Restore Default Settings
2.	Enters Full Camera Display Sequence format menu.
			Camera: Select
3.	Enters Quad Display Sequence menu.		5 is VCR + 1
			6 is VCR + 2
4.	Enters PIP Display Sequence menu.
5.	Enters Dual PIP Display Sequence menu.		DISPLAY: Accept and Return
6.	Enters Split/Squish Display Sequence format menu.

Note: Any changed camera display sequence will not be

applied until the display sequencing mode is activated by the front panel button.

QSP-660: Instructions for Basic Operation and Installation Page 10