StarTech.com usb dual vga cat5 kvm console extender - 650ft/200m manual Hotkey Commands

Page 11

Hotkey Commands

A hotkey command is a short key sequence to select a computer, activate computer scan, and so forth. The KVM Extender interprets keystrokes for hotkeys all the time. And the built-in buzzer generates a high-pitched beep for correct hotkey command; otherwise, one short and one long beep are generated for a bad command, in which the bad key command won’t be sent to the extender unit or the selected computer.

Cascade Architecture

The KVM Extender can be connected to the console ports of a KVM Switch, however to prevent any conflict via hotkey commands, the hotkey commands prefixed with Compatibility mode leading code can be applied for directly accessing to the KVM Extender.

Mask Hotkey Switch

The hotkey commands of KVM Switches vary among models, which may cause hotkey errors, unwanted configurations between the Extender Unit and mixed types of KVM Switches that connect to each other. The Mask Hotkey extremely simplifies the hotkey control in cascade architecture.

Cascade

Mask

 

Hotkey

Hotkey Commands

Architecture

Switch

 

 

 

 

 

Standard Mode (factory default). The hotkey command

 

 

starts with the leading code [left Ctrl + left Ctrl ]

NO

OFF

followed by one or two more keystrokes. Only the key

 

 

Ctrl located on the lower-left corner of the keyboard is

 

 

eligible for hotkey commands.

 

 

Compatibility Mode. Users can configure the

YES

OFF

computer attached to the KVM Switch by applying the

KVM Extender built-in hotkey command prefixed with

 

 

 

 

the cascade leading code [left Ctrl + left Ctrl + E ]

 

 

The state of the KVM Extender with or without

 

 

connection(s) to KVM Switch(es). Users can apply built-in

 

 

hotkey commands of its KVM Switch(es) or use the KVM

YES / NO

ON

Extender alternative hotkey command with the button

 

 

maneuvering Press & Hold push-button 2 Sec. followed

 

 

by one or two more keystrokes. In later descriptions, this

 

 

action will be simplified as“[BTN] (2sec.)”

Instruction Manual

8

Page 10 Page 12
Image 11
Page 10 Page 12
Contents USB Dual VGA Cat5 KVM Console Extender 650ft/200m FCC Compliance Statement Table of Contents System Requirements FeaturesIntroduction Packaging Contents Preparing Your Site Connecting Your KVM ExtenderInstalling the Remote Unit InstallationInstalling the Local Unit Page Local On Remote On Push-Button Control and LEDsPush-Button on Remote Unit Push-Button on Local UnitVideo Compensation Cascade Architecture Hotkey CommandsMask Hotkey Switch Page Local mode selection Reset the Unit to the factory defaultEscape from hotkey mode Mode selection in SequenceMouse resynchronized for PS/2 PC Remote mode selectionFunction Descriptions Privacy Setting Enable Hotkey Commands for Local UnitPrivacy setting enable Hotkey Commands for Remote Unit Esc Choose one color at a time for adjustmentCtrl Ctrl Alt+E Compatibility Mode Selection Beep CodesType SpecificationsRJ-45 Connector Pinout Solution TroubleshootingAdapter from your local dealers SolutionVerify if the Extender has enough power Limitation of Liability Technical Support Warranty Information

usb dual vga cat5 kvm console extender - 650ft/200m specifications

The StarTech.com USB Dual VGA CAT5 KVM Console Extender is a powerful solution designed to extend your keyboard, video, and mouse (KVM) control over substantial distances. With a remarkable capability of reaching up to 650 feet (200 meters), this extender allows users to place their control station far from the connected devices without sacrificing performance or functionality.

This KVM extender is particularly beneficial for environments where computers and workstations must be kept away from users, such as in server rooms, industrial settings, or production floors. By utilizing standard CAT5e or CAT6 cabling, the device minimizes the need for lengthy and expensive video cables, making it both a cost-effective and convenient option.

One of the standout features of the StarTech.com KVM console extender is its support for dual VGA video inputs. This allows users to connect two VGA monitors, effectively doubling their screen real estate and enhancing productivity. The extender supports video resolutions up to 1920x1200, ensuring high-quality visuals with minimal latency. The ability to maintain such quality over extended distances is a testament to the extender's advanced technology.

In terms of connectivity, the device offers multiple USB ports which ensure compatibility with a variety of USB devices including keyboards and mice. This flexibility ensures users have the necessary tools at their disposal, regardless of the computer system being used. The plug-and-play design further enhances usability, requiring no complex software installations or configurations.

The StarTech.com extender is engineered for durability and reliability, boasting a sturdy housing that can withstand the rigors of various environments. Additionally, it is equipped with LED indicators for power and connection status, allowing for easy troubleshooting when necessary.

Another significant characteristic is its support for various operating systems, making it a versatile choice for users across different platforms. With its blend of performance, practicality, and ease of use, the StarTech.com USB Dual VGA CAT5 KVM Console Extender stands out as an essential tool for anyone requiring effective long-distance KVM control. Whether in a commercial, educational, or industrial application, it delivers the reliability and functionality needed to boost productivity while simplifying remote access to computer systems.
Top Page Image Contents